Brakes Levers

pub-8348084515547660

Whole Sale Lot Bike Bicycle Scooter Parts $135Million
Paypal

US $135,000.00

All Wheel Drive Christini Mountain Bike Last production unit
Paypal

US $25,000.00

10 New Why Walk Pedicab Basic Bicycle Taxi Rickshaw
Paypal

US $14,995.00

Vintage 1987 Ross Mt McKinley Mountain Bike 22 Bicycle Shimano Deore XT 24
Paypal

US $14,849.00

NEW Limited Edition 2005 Trek 24k Gold Madone 59 SL 62cm Armstrong Livestrong
Paypal

US $12,000.00

NEW Limited Edition 2005 Trek 24k Gold Madone 59 SL 60cm Armstrong Livestrong
Paypal

US $11,999.00

Brakes Levers

How Does An Emergency Brake Work?

An emergency brake is a safety braking system that is specially designed to function in case of brakes totally fails. It is commonly referred to as a parking brake or e-brake. It only works through mechanical means and is independent of the hydraulic system that controls the brakes normally. Emergency brake is an important part of the motor vehicle’s safety systems. It can make a major difference in some emergency situations.

Besides using this in emergency situations, it is also used as a parking brake for preventing the car from rolling away if it slips into gear. The emergency brake should also be regularly checked like all parts of the braking system.

For activating the emergency brake, the driver simply pulls up a lever or pushes a pedal in the front of the vehicle. The setup of an emergency brake is simple, steel cables are attached to the emergency brake that run to the rear brakes of the car which are typical drum brakes. When the cables are tightened, the brake shoes are pulled into contact with the brake’s drum which eventually stops the car. Regarding the setup of disc brakes, the cables of the brake are connected to a small mechanism of screw that is meant for pushing a piston contacting the brake pads and forcing them to grip the brake rotor. The brake generally has a self-locking system and the driver has to lower the lever or move the pedal to take the brake off.

The emergency brake can be used by the driver to stop the car safely if there is an emergency situation of a total brake failure. The brake must be set slowly in this situation rather than quickly pulling. It will prevent the car from spinning or fishtailing. An emergency brake is deliberately used by some drivers for this purpose but this sort of driving must only be undertaken by drivers who are experts because it can be very dangerous.

A car which has a manual transmission uses the emergency brake as a parking brake on a regular basis. Some drivers also use it at stop signs. As the emergency brake is frequently used, it is kept in good working order. However the cables might need to be tightened periodically. Some drivers do not set the emergency brake as a parking brake in cars which have automatic transmissions. In addition to safety, this also can result in the rusting and corrosion in the emergency brake cable. This can lead to a cable failure in an emergency.

Parking brake must be used by drivers every time when they park; the emergency braking system must also be checked with periodic intervals. The condition of the cables should also be checked during an inspection; they should be tightened or moved if necessary. Additionally at this time, the wear of the brake pads can also be inspected for ensuring that they do not need to be replaced.

About the Author

You might also want to know how to bleed brakes and how to change brake pads. Be careful while working with brakes. A small mistake can lead to a big problem.

Brake and Clutch Lever Install Show Chrome Accessories Big Bike Parts - Cruiser Customizing